• FAQ FAQ FAQ
  • Tutorial Video Tutorial Video Tutorial Video
  • Manuals Manuals Manuals
  • Datasheet Datasheet Datasheet
What to do if the SD card cannot be initialized?

If you encounter difficulties when trying to initialize the SD card via the EZVIZ APP, below are some troubleshooting steps to resolve the issue for you:

1. Ensure both the firmware of your camera and EZVIZ APP are running on the latest version.

2. Ensure the SD card is class 10 or rated at UHS-1. The file format of the SD card should be FAT32 for capacities below 64GB and exFAT for capacities of 64GB and above. Click Here to view partial test results of SD card compatibility.

3. Power off your camera, remove and reinsert the SD card, power the camera on and then initialize the card again on the EZVIZ APP.

4. To further rule out the SD card issue, you may try to test with a different SD card or install the card in question on another EZVIZ device. 

5. Try to factory reset your camera by holding the Reset button. This will turn the device to the default factory settings and might help resolve minor issues.



What to do if my EZVIZ camera cannot be charged

If you're encountering difficulties charging your EZVIZ camera, here are some steps you can take to troubleshoot the issue:

1. Check the power source: Make sure the power outlet you're using is working properly. You can also try plugging the camera into a different outlet.

2. Check the power cable: Make sure the power cable is not damaged or frayed. You may also try using a different charging cable to see if that solves the problem.

3. Reset the camera: If there is still remaining power in the camera, you can try resetting the camera by pressing and holding the reset button for about 10 seconds. This will typically restore the camera to its default settings and may help resolve any charging issues.


  • BC1 Kit Unboxing Video BC1 Kit Unboxing Video

    BC1 Kit Unboxing Video

  • BC1 Kit Tutorial Video BC1 Kit Tutorial Video

    BC1 Kit Tutorial Video